Flow cell unit
Flow Cell Unit 2mL, Package 5
Recommended price
SKU: 12-0309-01
Five flow cell units (FCU) used in the detection unit of the following instruments: AMPTS III, BRS III, BPC Go, BPC Core, GE III, and BPC Blue.
Gas enters the water filled flow cell unit and is trapped until the lifting force is enough to trigger an opening of the flow cell. As the flow cell is opened, the gas is released and a hall sensor, located inside of the main unit, is triggered by the absence of the flow cells tip, which houses a magnet.
Each flow cell unit comes with a specific calibrated value that needs to be entered properly into the software of the main unit. Flow cells need to be filled with distilled or deionised water, using a syringe (ART No 12-0403-01).
Description
Five flow cell units (FCU) used in the detection unit of the following instruments: AMPTS III, BRS III, BPC Go, BPC Core, GE III, and BPC Blue.
Gas enters the water filled flow cell unit and is trapped until the lifting force is enough to trigger an opening of the flow cell. As the flow cell is opened, the gas is released and a hall sensor, located inside of the main unit, is triggered by the absence of the flow cells tip, which houses a magnet.
Each flow cell unit comes with a specific calibrated value that needs to be entered properly into the software of the main unit. Flow cells need to be filled with distilled or deionised water, using a syringe (ART No 12-0403-01).
2 ml cells are used for lower gas flows (<1500 ml/h) if you require higher gas volume flows (<6000 ml/h) refer to 9 ml FCUs (ART NO 12-0309-02)
This package includes 10 check valves.
Note: This item cannot be used on its own. It can only be used as part of an AMPTS III, GE, GE III, and BPC Blue. The FCU alone will not register any data.
For individual flow cells, refer to Flow Cell Unit 2 mL (ART NO 12-0302-01)
Talk to a Specialist about Flow Cell Unit 2mL, Package 5
Contact us to request more information of a formal quote.
